For homes
We extract water from carpet, hardwood, and subfloors in houses and apartments. You get a clear plan and daily updates.
- Burst pipe in a wall
- Appliance leak in kitchen
- Storm water in basement
Water extraction Azle TX that stops damage fast
When water is rising in your home, every minute counts. Our water extraction Azle TX team arrives with truck-mounted units and moisture meters to pull standing water from carpet, hardwood, and subfloors before it spreads. We handle burst pipes, appliance leaks, and storm flooding across Tarrant County. Call (817) 989-2786 and we will be on the way.
Check moistureExtract waterSet drying- We show upOn time, with the right equipment
- We explainWhat is wet and why
- We protectFloors, walls, and belongings
- We documentReadings and photos for your claim
What our water extraction service includes
Every water extraction job starts with a full inspection and ends with verified dry readings. Here is what is included in a standard scope. If your job needs mold remediation, reconstruction, or content cleaning, we will tell you upfront and quote it separately.
Moisture inspection and mapping
We use a moisture meter, thermal imaging camera, and hygrometer to find all affected materials. You get a written map showing wet zones and dry zones before we start extraction.
Standing water removal
Truck-mounted water extraction units and submersible pumps remove standing water from carpet, hardwood, tile, and concrete. We extract until the surface is dry to the touch.
Antimicrobial application
We apply antimicrobial solution to affected framing, baseboards, and subfloor to stop mold growth. This is standard on every water job, not an add-on.
Drying equipment setup
Air movers and dehumidifiers are placed based on our moisture map. We may add a negative air machine for sewage or mold risk. You get a written drying plan with target readings.
Daily moisture monitoring
We return every 24 hours to check readings and adjust equipment. You get updates on progress and a clear timeline for when drying will be complete.
Final documentation
You receive a completion report with photos, moisture readings, and a summary of work performed. This is formatted for insurance claims and your records.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For businesses
We handle water extraction for offices, retail, and rental properties. We work around your hours to minimize downtime.
- Flooded retail space
- Office ceiling leak
- Rental unit water damage
What water extraction Azle TX actually involves
A plain-language look at what Water Extraction involves and when it is needed.
See how it worksWater extraction Azle TX is the mechanical removal of standing water from a structure using high-capacity pumps and vacuums, followed by moisture mapping and drying. It is the first and most important step after any leak, flood, or sewage backup. We use a moisture meter and thermal imaging camera to find water you cannot see behind drywall and under wood subfloor. Then we pull it out with truck-mounted water extraction units before mold growth can start, which in Texas humidity can begin in as little as 24 to 48 hours.
Most calls we run in Azle start with a burst pipe, a slab leak, or a failed water heater connection. We also get called after storms push water through roof leak points and foundation water intrusion during heavy spring rains. If you search for water extraction near me Azle TX at 2 a.m., you want a crew that knows how to stop the source, extract the water, and set drying equipment the same night. That is exactly what we do.
Water extraction removes the water first, then we dry the structure to prevent mold.
- What it is
- Mechanical removal of standing water from a structure using pumps and vacuums.
- When you need it
- After any leak, flood, or sewage backup that leaves standing water or saturated materials.
- What to expect
- Inspection, extraction, drying equipment setup, daily monitoring, and final dry verification.
Our water extraction process, step by step
Every job follows the same sequence, whether it is a small appliance leak or a flooded basement. Here is what you can expect from the first call to the final moisture check.
-
Emergency call
You call (817) 989-2786 and describe what is wet. We ask about the water source, how long it has been running, and whether sewage is involved. That tells us what equipment to load. We give you a straight arrival window and stay on the line to help you shut off the water if you have not already.
- Call
- Describe
- Dispatch
-
Inspection and mapping
On arrival we walk the space with a moisture meter and thermal imaging camera. We check baseboards, drywall, and HVAC ducting for hidden moisture. You get a plain-language explanation of what is wet, what is not, and what we plan to do before we start any equipment.
- Inspect
- Map
- Explain
-
Water removal
We set up truck-mounted water extraction units and pull standing water from carpet, hardwood, and concrete. For deep water we use submersible pumps first. Most residential rooms are extracted in one to three hours. We protect doorways and furniture as we work.
- Extract
- Pump
- Remove
-
Drying setup
After extraction we place air movers and dehumidifiers based on our moisture map. We may install a negative air machine if there is sewage or mold risk. You get a written drying plan with target moisture levels and a schedule for follow-up checks, usually every 24 hours.
- Set up
- Monitor
- Adjust
-
Final verification
We do not pull equipment until readings match dry standards. We use a hygrometer and moisture meter to confirm wood subfloor, drywall, and baseboards are back to normal. You receive a completion report with photos and final readings for your records and your insurance claim.
- Verify
- Document
- Complete
Tools and methods we use
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
Truck-mounted water extraction unit
High-capacity suction for pulling hundreds of gallons per minute from carpet, hardwood, and concrete. This is our primary extraction tool.
Moisture meter and hygrometer
Used to measure moisture content in wood, drywall, and concrete. We compare readings to dry reference samples to know when a structure is truly dry.
Thermal imaging camera
Finds hidden moisture behind walls and under floors without cutting into them. It shows temperature differences caused by evaporating water.
Air mover and dehumidifier
Dri-Eaz and Phoenix Restoration air movers circulate air across wet surfaces. Dehumidifiers pull moisture from the air to speed drying and prevent mold.
Negative air machine and HEPA vacuum
Used on sewage or mold jobs to contain airborne spores and particles. The HEPA vacuum cleans surfaces after remediation.
Thermal views are illustrative, generated from the photographs.
Methods
Fogger and antimicrobial solution
We fog affected areas with Benefect or Fiberlock antimicrobial to kill mold spores and bacteria on contact. This is standard on every water job.
IICRC S500 standard
We follow the IICRC S500 standard for water damage restoration. It defines water categories, drying goals, and documentation requirements. Following it means your job is done to an industry-recognized standard, not guesswork.
Moisture mapping and daily monitoring
We map wet zones on day one and check readings every 24 hours. Equipment is adjusted or removed based on data, not a calendar. You get updates on progress and a clear timeline.
Containment and negative air
For category 3 water or mold risk, we build containment with plastic sheeting and run a negative air machine. This keeps spores and contaminated air from spreading to clean rooms.
Xactimate documentation
We write our scope in Xactimate, the same software most insurance adjusters use. That means your claim is documented in a format they recognize, which speeds up approval and reduces disputes.
When to call for water extraction
Burst pipe
You wake up to a burst pipe spraying water in the hallway at 2 a.m.
Call (817) 989-2786. We dispatch a crew with truck-mounted extraction units and submersible pumps. We shut off the water, extract the standing water, and set drying equipment before we leave.
Outcome: Your hallway and adjacent rooms are extracted and drying the same night. No mold, no warped floors.
Water heater
Your water heater fails before a holiday weekend and floods the garage.
We extract the water, remove wet drywall and insulation, and set air movers. We also document the failed unit for your insurance claim and can recommend a replacement plumber.
Outcome: The garage is dry in three days. You have photos and readings for your claim.
Storm flood
A storm pushes water through your foundation and soaks the carpet in Azle Heights.
We treat it as contaminated water. We extract the carpet, remove the pad, and apply antimicrobial solution. A negative air machine runs during drying to keep mold spores contained.
Outcome: The carpet is saved if caught early. If not, we replace the pad and dry the subfloor to standard.
Washer leak
Your washing machine supply line bursts while you are at work.
We extract the water from the laundry room and adjacent hallway, check the wood subfloor with a moisture meter, and set drying equipment. We also inspect the baseboards for wicking.
Outcome: The floor is dry in two to three days. No cupping, no mold.
Slab leak
A slow slab leak has left your bathroom carpet damp for a week.
We use a thermal imaging camera to map the moisture, extract the carpet and pad, and dry the slab. We apply antimicrobial solution to the baseboards and check for mold growth.
Outcome: The slab and framing are dry.
How water extraction runs in Azle
Azle sits in Tarrant County where the soil holds water after heavy spring rains, and that means foundation water intrusion and slab leaks are common calls. Summer humidity slows drying if you rely on open windows, so we always use commercial dehumidifiers. Winter brings the opposite problem: frozen pipes that burst when they thaw, often at 2 a.m. We know the building stock here.
Downtown Azle has older homes with pier-and-beam foundations and original hardwood that needs careful drying. Azle Heights has more slab-on-grade construction where water travels under the floor and shows up in a different room. If you need water extraction after flooding in Azle, Texas, we treat storm water as contaminated and use containment.
We serve ZIP codes 76020 and 76098 and know the roads well enough to give you a real arrival window.
- Downtown Azle: Older homes with pier-and-beam foundations and original hardwood. We dry these slower to prevent cupping and checking in the wood.
- Azle Heights: Slab-on-grade construction. Water travels under the slab and often shows up in a different room than the source. Thermal imaging is essential here.
- Pelican Bay: Lakefront properties with higher water tables. Foundation water intrusion is common after heavy rains, and sump pumps need checking.
- Eagle Mountain: Larger homes on well water and septic. Appliance leaks and water heater failures are frequent calls in this area.
- Spring storms and heavy rain: Saturated soil pushes water through foundations and roof leak points. We see a spike in flooded basements and crawlspace calls from March through May.
- Summer humidity above 60%: Drying takes longer without dehumidification. We size equipment based on the actual humidity reading, not a rule of thumb.
We walk through and explain what is wet We protect the space and set up equipment We schedule follow-up checks and next steps
From problem to finished result.
Kitchen flood from burst pipe
Before: A supply line burst under the kitchen sink overnight and flooded the kitchen, hallway, and two bedrooms. Carpet was soaked, baseboards were wicking water, and the wood subfloor read 28% moisture.
After: We extracted 40 gallons of standing water, removed wet pad, and set 12 air movers and 3 dehumidifiers. After four days, the subfloor read 12% and the baseboards were dry. The carpet was saved and re-stretched.
Keep an eye on the supply line and replace it every five years. Run a dehumidifier in summer to keep indoor humidity below 50%.
Slab leak in Azle Heights
Before: A slow slab leak soaked the carpet in a hallway for over a week. The pad was black with mold and the baseboards showed visible growth. Moisture readings were off the chart.
After: We removed the carpet and pad, extracted water from the slab, and treated the framing with antimicrobial solution. After remediation and drying, the slab read dry and new carpet was installed. The mold issue was resolved.
Watch for unexplained spikes in your water bill. That is often the first sign of a slab leak. Call a plumber early.
Storm flooding through foundation
Before: A spring storm pushed water through the foundation and flooded a finished basement. Carpet, drywall, and insulation were soaked with contaminated water. The HVAC ducting was also wet.
After: We built containment, ran a negative air machine, and extracted the water. Contaminated drywall and insulation were removed. After five days of drying, the space was dry and ready for reconstruction.
Check your foundation drainage and gutters before storm season. Make sure downspouts discharge at least six feet from the house.
Water problems we solve in Azle
Most water damage starts small and gets expensive fast. These are the calls we run most often in Azle and how we stop the damage.
- Burst pipeBurst pipe flooding a kitchen or bathroomWater spreads under cabinets and into adjacent rooms within minutes. Drywall and insulation soak it up like a sponge. We shut off the water, extract standing water from the floor and cabinets, and remove wet drywall and insulation. Then we set air movers and dehumidifiers to dry the wall cavity and subfloor. Most kitchen floods are dry in three to four days.
- Slab leakSlab leak soaking carpet and baseboardsSlab leaks are slow and hidden. By the time you see wet carpet, the pad and baseboards have been wet for days and mold may already be growing. We use a thermal imaging camera to trace the moisture path, extract the carpet and pad, and dry the concrete slab. We apply antimicrobial solution to the baseboards and framing.
- Appliance leakAppliance leak from washer or refrigeratorA failed supply line can dump gallons per hour. Water wicks into the wood subfloor and can warp hardwood within 24 hours. We pull the appliance, extract the water, and use a hygrometer to check the wood subfloor. Air movers and dehumidifiers dry the floor to a safe moisture level. We document everything for your insurance claim.
- Storm floodingStorm flooding through roof leak or foundationStorm water is contaminated and can carry sewage or chemicals. It soaks insulation and HVAC ducting, creating a health hazard. We treat storm water as category 3. That means containment, negative air machine, and disposal of affected materials. We extract the water, remove contaminated drywall and insulation, and disinfect the space before drying.
Why fast water removal matters
Fast extraction and proper drying save your floors and prevent mold.
Stop mold before it starts
Mold can colonize wet drywall in 24 to 48 hours. We extract water and apply antimicrobial solution the same day, then set air movers and dehumidifiers to dry the structure below 15% moisture content. That is the difference between a cleanup and a full mold remediation job.
Save your carpet and padding
Carpet water extraction Azle, Texas homeowners call us for can often save the carpet itself if we get there within 12 to 24 hours. We pull the padding, extract the carpet face, and dry it flat. If the backing is delaminated or the water was contaminated, we will tell you straight and replace what cannot be saved.
Protect your subfloor
Wood subfloor swells and cups when it stays wet. We use a hygrometer to read moisture in the wood and adjust drying until it matches a dry reference sample. Catching it early avoids squeaky floors, tile cracks, and the cost of replacing entire floor sections.
Document everything for insurance
We photograph affected materials, log moisture readings, and write our scope in Xactimate so your adjuster sees exactly what happened. That documentation speeds up claims and reduces the chance of a denied or underpaid payout after flood water extraction Azle events.
What a written scope covers.
What a written scope covers and what shapes it. Prices are set by the business after the first look.
Included
- Moisture inspection and mapping
- Standing water extraction
- Antimicrobial application
- Drying equipment setup
- Daily moisture monitoring
- Final documentation
Depends on
- Square footage affected
- Water category
- Materials affected
- Mold presence
- After-hours timing
- Insurance coverage
What you receive
Clear records you can keep and share.
Moisture map
Shows wet and dry zones
Drying plan
Equipment placement and targets
Daily log
Readings and progress notes
Final report
Photos and dry verification
Water categories and what they mean
Not all water is the same. The category determines how we handle extraction and disposal.
Category 1
Clean water from a supply line
- Safe to touch
- Extract and dry
- Carpet often saved
Category 2
Gray water with some contamination
- Washing machine
- Dishwasher
- Needs antimicrobial
Category 3
Black water with sewage or storm water
- Containment required
- Materials disposed
- Negative air machine
Materials we work with
- Carpet
- Hardwood
- Drywall
- Baseboards
- Subfloor
- Insulation
- Concrete
- Tile
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 76020
- 76098
Towns we serve.
Based in Azle and covering the places around it. Pick one for local details.
What Azle customers say
Frequently Asked Questions
A single room with clean water is often on the lower end. Sewage backup or flooded basements cost more because of containment and disposal. We give you a written scope before we start, and we bill insurance directly when the claim covers it.
The extraction itself usually takes one to three hours for a typical room. Full structural drying takes three to five days. You will see air movers and dehumidifiers running the whole time. We check moisture every 24 hours and adjust equipment. Do not turn anything off early, even if the floor feels dry to the touch. The wood and drywall hold water longer than the surface.
Yes, if we get to it within 12 to 24 hours and the water is clean. We pull the carpet up, extract the face, replace the padding, and dry it flat with air movers. Carpet that has been wet longer than 48 hours, or that was soaked with sewage or storm water, usually needs replacement. We will tell you honestly which category yours falls into before we start.
Yes. Our primary extraction equipment is truck-mounted, which gives us far more suction and water capacity than portable units. For deep standing water we start with submersible pumps, then finish with the truck mount. That combination handles everything from a small appliance leak to a flooded basement. We also carry portable units for tight spaces like closets and crawlspaces.
Related Services
Other services from the same team.
- Structural DryingAfter extraction, we dry the structure with industrial dehumidifiers and air movers. We monitor moisture levels daily with moisture meters and adjust equipment until your home is dry. This prevents warping, swelling, and long-term structural damage.
- DehumidificationHigh humidity after a leak can cause mold growth and musty odors. We use Dri-Eaz dehumidifiers and negative air machines to pull moisture from the air and HVAC ducting. We also apply antimicrobial solution to affected areas to stop mold before it starts.
- Water Damage RestorationWe restore homes and businesses after any water intrusion, from burst pipes to foundation water intrusion. Our process includes water extraction, structural drying, and antimicrobial treatment to prevent mold growth. We work with your insurance and document every step.
Call now for water extraction Azle TX
Standing water does not wait, and neither should you. Call (817) 989-2786 and we will dispatch a crew with truck-mounted extraction equipment. We will stop the source, pull the water, and start drying the same day.
Contact Water Damage Azle
Call us anytime at (817) 989-2786 for emergency service or to schedule an inspection. You can also email info@waterdamageazle.com or stop by our office.
- Phone
(817) 989-2786 - Email
info@waterdamageazle.com - Address
Azle, Texas